oil mining water decoloring agent

It is a quaternary ammonium cationic polymer. It has excellentefficiency in de-coloring, flocculating and COD removal.

Main Componentsdicyandiamide formaldehyde resinApplication1. It ismainly used for waste water treatment for printing, dyeing,textile, mining, ink, paper and so on.2. It can be mainly used forcolor removal treatment for high-colority waste water fromdyestuffs plants. It is suitable to treat waste water withactivated, acidic and disperse dyestuffs. 3. It also can be used inthe production process of paper & pulp as retentionagent.Advantage1.Stronger decolorization(>95%) and removal ofCOD,BOD(40—70)2.Faster sedimentation, betterflocculation3.Non-pollution(no aluminum, chlorine, heavy metal ionsect.)Specifications:ItemCW-01CW-05CW-06Appearancecolorless orlight-color sticky liquidDynamic viscosity(cps,20°C)50~50010~5050~300pH (30% watersolution)3.0~5.03.0~5.03.0~5.0Solid content % ≥505050Note:Cleanwater produces as per customers’ needs.Application Method1.The product shall be diluted with 10-40 times water and then dosedinto the waste water directly. After being mixed for severalminutes, it can be precipitated or air-floated to become clearwater. 2. The pH value of the waste water should be adjusted to4-12 for better result. 3. When the colority and CODcr arerelatively high, it can be used with the help of polyaluminumchloride, but not mixed together. In this way, the treatment costcan be lowered. Whether polyaluminum chloride is used beforewardsor afterwards depends on the flocculation test and the treatmentprocess.Package & Storage1. It is harmless, no-flammable andnon-explosive, it can be stored at room temperature, it can not beplaced in the sun. 2. It is packaged in plastic drums with eachcontaining 25kg, 200kg, 250kg ,or others according to therequirements of clients.3. Storage temperature: 5-30°C.4.Theproduct would show slightly stratification or appear white at lowtemperature. There is no negative impact on the performance aftermixing up.   Application of CW-06 Water DecoloringAgent   1.Wastewater Treated:  Dyeingwastewater with activated color and dispersing color, it isdifficult to be treated by other water treatmentproducts.   2.Treating Process: Dyeingwastewater treated by biotechnology  Dose CW-06 → Dose PAC →Dose PAM → treated water  3.Application Data *Dosage of CW -06: 40-100 PPM   Dosage of PAC: 150PPM   Dosage of PAM: 1 PPM  * Waster waterinlet   COD: 600 mg/l   Color: 250-300times  * Wastewater treated(outlet)   COD:about 100mg/l   Color: 40-50times  4.Result a) CW -06 has good color removal andespecially to red color, it can treat the wastewater to reachChinese Standard. b) In the practice application, apply withPAC and PAM together, it can get better result and it is moreeconomic. * Chinese color unit is time, it means how manytimes the water diluted by distilled water to reach nocolor. * PAC – poly-aluminum chloride * PAM –polyacrylamide anionic type oil mining water decoloring agent
oil mining water decoloring agent